how to remove honda civic glove box

Daniel Parker

2 min read

·

30-01-2025

1

0

Share

The glove box, or glove compartment, in your Honda Civic is a handy storage space. But what if you need to access the area behind it? Maybe you're installing new speakers, fixing a rattling noise, or just need to retrieve a dropped item. This guide will walk you through the process of removing your Honda Civic's glove box, regardless of the model year (with minor variations depending on the year). Always consult your owner's manual for specific instructions relating to your vehicle's year and model.

Tools You'll Need

Before you begin, gather these essential tools:

• Small Phillips head screwdriver: This is crucial for removing screws.
• Panel removal tool (optional but recommended): These plastic tools help avoid scratching the dashboard. A flat, blunt plastic pry tool will work in a pinch.
• Small flashlight: Helps illuminate hard-to-see areas.

Step-by-Step Guide to Removing Your Honda Civic Glove Box

Important Note: The exact procedure may differ slightly depending on your Honda Civic's model year. Always refer to your owner's manual for the most accurate instructions specific to your vehicle.

1. Locate the Glove Box Screws:

Open the glove box fully. Inside, you'll find one or two small screws. Some models have a screw on each side, while others only have one centered at the top or bottom of the glove box compartment.

2. Remove the Glove Box Screws:

Carefully unscrew these retaining screws using your Phillips head screwdriver. Keep the screws in a safe place to avoid losing them.

3. Gently Pull the Glove Box Forward:

Once the screws are removed, gently but firmly pull the glove box forward and away from the dashboard. Don't force it; there may be clips or hinges holding it in place.

4. Disconnect the Glove Box Hinge(s):

You may find that the glove box is still connected by hinges. There are often small plastic clips or tabs securing the hinges. Gently work these loose. Using a panel removal tool to gently pry them can help protect the plastic.

5. Carefully Remove the Glove Box:

Once the hinges are disconnected, you should be able to remove the glove box completely. Set it aside in a safe place.

6. Access Behind the Glove Box:

Now you have full access to the space behind the glove box. Complete your task, whether it’s installing speakers, fixing a rattle, or retrieving a lost item.

Reinstalling the Glove Box

Reinstalling the glove box is the reverse of the removal process:

1. Connect the hinges: Carefully align the glove box hinges and attach them securely to the dashboard.
2. Secure with screws: Replace the screws you removed earlier, ensuring they are tightened securely.
3. Close the glove box: Test the glove box to ensure it closes properly and smoothly.

Troubleshooting

• Glove box won't come out: Double-check that all screws and clips are removed. Gently apply even pressure, and use a panel removal tool to aid in the release of any stubborn clips.
• Damaged clips or hinges: If you break any plastic clips during removal, you might need to replace them. These parts are usually available from your local Honda dealer or online auto parts retailer.

This guide provides general instructions. Remember to always consult your owner's manual for model-specific details. By following these steps, you should be able to successfully remove and reinstall your Honda Civic's glove box. Remember to take your time and be gentle to avoid damaging any parts.