close
close
how to get reclaim out of a rig

how to get reclaim out of a rig

2 min read 06-02-2025
how to get reclaim out of a rig

Reclaim, that sticky, potent residue left behind after dabbing or other extraction methods, is valuable. Getting it out of your rig efficiently and safely is crucial. This guide provides various techniques for reclaim recovery, ensuring you maximize your yield and maintain your equipment's integrity.

Understanding Reclaim and Its Importance

Reclaim is a concentrated form of cannabinoids and terpenes. It's essentially the leftover oils and resins from your dabbing sessions. While not as potent as fresh concentrates, reclaim offers a cost-effective way to reuse precious material. Knowing how to extract it properly keeps your rig clean and extends its lifespan.

Methods for Reclaim Removal: A Step-by-Step Approach

Several methods exist for removing reclaim, each with its advantages and disadvantages.

1. The "Soak and Scrape" Method: Simple and Effective

This straightforward method is ideal for beginners.

Materials:

  • Isopropyl alcohol (high percentage, 91% or higher)
  • Small container (glass or silicone)
  • Scraper (metal spatula, dab tool, or similar)
  • Coffee filter or cheesecloth
  • Baking sheet

Steps:

  1. Soak: Carefully pour isopropyl alcohol into your rig, ensuring all surfaces are coated. Let it soak for at least 30 minutes, possibly longer for stubborn reclaim.
  2. Scrape: Using your scraper, gently remove the softened reclaim. Be cautious not to scratch the glass.
  3. Filter: Pour the alcohol and reclaim mixture through a coffee filter or cheesecloth into a clean container. This separates the reclaim from the alcohol.
  4. Evaporate: Spread the filtered mixture thinly on a baking sheet. Let the alcohol evaporate completely in a well-ventilated area away from heat sources. This usually takes several hours.
  5. Collect: Once the alcohol has evaporated, you'll be left with your reclaim.

Note: Always work in a well-ventilated area when using isopropyl alcohol.

2. The "Heat and Scrape" Method: For Stubborn Reclaim

This method is best for tough, baked-on reclaim.

Materials:

  • Heat source (hair dryer or heat gun – use caution!)
  • Scraper
  • Small container

Steps:

  1. Heat: Gently heat the affected areas of your rig using the heat source. Avoid overheating the glass, which could cause cracking.
  2. Scrape: Once the reclaim softens, scrape it off using your tool.
  3. Collect: Carefully gather the collected reclaim into a container.

Important: Exercise extreme caution when using heat. Excessive heat can damage your rig.

3. Using a Specialized Reclaim Catcher

Many rigs now come with integrated reclaim catchers. These make the process significantly easier.

Steps:

  1. Remove: Carefully remove the reclaim catcher from your rig.
  2. Scrape or Soak: Use the soak and scrape method or simply scrape out the reclaim if it's soft enough.

Safety Precautions: Protecting Yourself and Your Rig

  • Ventilation: Always work in a well-ventilated area, especially when using isopropyl alcohol.
  • Heat: Use caution when applying heat. Overheating can crack your glass rig.
  • Eye Protection: Consider wearing safety glasses to prevent accidental splashes or debris from getting in your eyes.
  • Disposal: Dispose of used isopropyl alcohol responsibly according to local regulations.

Conclusion: Reclaiming Your Reclaim

Getting reclaim out of your rig doesn't have to be a daunting task. By following these methods, you can reclaim your valuable concentrate and keep your equipment clean and functioning optimally. Remember to prioritize safety and choose the method best suited for your rig and reclaim consistency. Enjoy the fruits of your labor!

Related Posts