how to change the gobos on gigbar move ils

Daniel Parker

2 min read

·

07-02-2025

1

0

Share

The GigBar Move ILS is a popular lighting fixture known for its versatility and ease of use. One of its key features is the ability to swap gobos, allowing you to customize your lighting effects. This guide will walk you through the process of safely and efficiently changing the gobos on your GigBar Move ILS.

Understanding Gobo Types and Location

Before you begin, it's crucial to understand what type of gobos your GigBar Move ILS uses. Refer to your user manual to confirm. Generally, they are metal gobos that are inserted into a dedicated slot within the fixture. Locate this slot; it's usually clearly marked and accessible.

Tools and Preparation

You will need only one tool for this process: a small flathead screwdriver. No other tools are necessary. Ensure the GigBar Move ILS is completely switched off and unplugged from the power source before attempting any gobo changes. This is crucial for safety and prevents accidental damage to the fixture.

Step-by-Step Gobo Replacement

1. Access the Gobo Housing: Locate the gobo housing on your GigBar Move ILS. This is typically a small, easily accessible compartment. It might require a slight twist or removal of a small panel. Consult your instruction manual if you are unsure of the exact location.

2. Open the Housing: Gently open the gobo housing. This might involve using your fingers or, if necessary, the flathead screwdriver to carefully pry it open. Avoid using excessive force as this could damage the fixture.

3. Remove the Old Gobo: Once the housing is open, you'll see the current gobo in place. Carefully remove it. Hold it by the edges to avoid smudging the gobo surface. Set it aside in a safe place, ensuring it's not scratched or damaged.

4. Insert the New Gobo: Take your new gobo and carefully insert it into the empty slot. Make sure it's seated correctly and fully inserted. Again, avoid applying excessive force.

5. Close the Gobo Housing: Gently close the gobo housing. Ensure it is securely fastened. If it doesn't close easily, double-check that the gobo is properly seated.

Troubleshooting

• Gobo Won't Fit: If the new gobo doesn't fit, double-check that you have the correct type of gobo for your GigBar Move ILS. Refer to your manual or the manufacturer's website for compatibility information.
• Housing Won't Close: If the housing won't close, re-check the gobo placement. Ensure it's fully seated and hasn't become wedged.
• Image is blurry or distorted: The gobo may not be seated properly. Try removing and reinserting it.

Post-Replacement Check

After replacing the gobo, reconnect the GigBar Move ILS to the power source and switch it on. Test the new gobo to ensure it projects the desired image correctly. If there are any issues, re-check the steps and consult your user manual.

Maintaining Your Gobos

Properly caring for your gobos will extend their lifespan. Always handle them carefully, avoid touching the projection surface, and store them in a clean, dry place when not in use.

This guide provides a general overview. Always refer to your GigBar Move ILS's specific user manual for detailed instructions and safety precautions. If you encounter any difficulties, contact the manufacturer's customer support for assistance. Remember to always prioritize safety and handle the fixture with care.