how to change battery in crimson trace laser grip

Daniel Parker

2 min read

·

05-02-2025

1

0

Share

Crimson Trace laser grips enhance firearm accuracy and provide a tactical advantage in low-light situations. But like all electronic devices, they require battery changes. This guide provides a step-by-step process for replacing the battery in your Crimson Trace laser grip. Knowing how to do this quickly and easily is crucial for maintaining operational readiness.

Identifying Your Crimson Trace Model

Before beginning, identify your specific Crimson Trace model. The battery replacement process can vary slightly depending on the model. Your model number is usually found on the laser grip itself. Knowing your model allows you to consult the official Crimson Trace instruction manual for precise instructions.

Tools and Materials Needed

You will need:

• New Battery: Check your Crimson Trace manual for the correct battery type (usually a single CR2032 or similar lithium battery). Always use a fresh battery from a reputable supplier.
• Small Flathead Screwdriver: This is typically needed to access the battery compartment.
• Possibly a Coin or Small Object: Depending on the model, a small object might be needed to carefully pry open a compartment.

Important Note: Always ensure your firearm is unloaded and pointed in a safe direction before attempting any maintenance, including battery changes.

Step-by-Step Battery Replacement Guide

While specific steps may vary by model, the general process is as follows:

Step 1: Accessing the Battery Compartment

1. Consult Your Manual: The first step is always to refer to your specific Crimson Trace laser grip's instruction manual. This manual contains diagrams and detailed instructions for your particular model.
2. Locate the Compartment: Typically, the battery compartment is located on the side or bottom of the laser grip. It might be hidden under a small cover or secured with a screw.
3. Remove the Cover/Screw: Carefully remove the cover or unscrew the retaining screw using your small flathead screwdriver. Avoid using excessive force.

Step 2: Removing the Old Battery

1. Locate the Battery: The old battery will be visible in the compartment.
2. Gently Remove: Carefully remove the old battery. You may need to use your fingernail or a small, non-metallic tool to gently pry it out if it's stuck.
3. Dispose Properly: Dispose of the old battery responsibly according to local regulations.

Step 3: Installing the New Battery

1. Insert the New Battery: Carefully insert the new battery, ensuring correct polarity (+ and -). The battery compartment typically has markings indicating the correct orientation.
2. Secure the Compartment: Reattach the battery compartment cover or tighten the screw.

Step 4: Testing the Laser

1. Attach the Grip to your Firearm: Carefully attach the laser grip back to your firearm, ensuring it's securely fastened.
2. Activate the Laser: Activate the laser to ensure it's functioning correctly. Refer to your model's instructions for activation.

Troubleshooting

• Laser Doesn't Turn On: Double-check battery polarity. Try a brand new battery from a different source.
• Laser Is Dim: The battery may be low or nearing the end of its life. Replace it with a fresh one.
• Persistent Issues: If problems persist, consult your Crimson Trace instruction manual or contact Crimson Trace customer service for assistance.

Maintaining Your Crimson Trace Laser Grip

Regular battery changes and proper storage are key to maintaining your Crimson Trace laser grip's optimal performance. Always refer to the manufacturer's instructions for specific maintenance and care recommendations. Regularly inspecting the battery compartment for any signs of corrosion or damage is also recommended.

By following these steps, you can ensure your Crimson Trace laser grip remains ready when you need it. Remember safety first – always handle your firearm responsibly.